| 1. How to buy ? |
| A: Directly purchase the device from Jinke. |
| |
| 2. How to download the books (files) to the eReader? |
| A:The books or files can be directly downloaded to the SD card or internal storage (if it has) through USB cable, or can be downloaded to the SD card through SD card reader. |
| |
| 3. Can V model play music while an ebook reading? |
| A:Yes, it can play music while you are reading an eBook.(except audio eBook), but you need to make sure to turn on the music firstly , then open an ebook without turning off the music. |
| |
| 4. How long the battery last after charging? Does the battery can be replaced by the user? |
A:It can support the power for turning not less than 8000 pages; music playing for up to 10 hours after fully charged.
The product adopts the general battery (Nokia Bl4c, Bl5c); user can buy it in any electronics shop. Battery fully charged need three (3) hours through charger, and six (6) hours through USB cable. |
| |
| 5. When the device can not be bootable, how to solve it? |
| A:When you can not boot the device, please firstly pull out the battery, and connect the charger, then the device can be started. After that, install the battery, the battery will be charged. |
| |
| 6. How to update V3? |
A:Notice: In order to guarantee the battery has enough power for update, please connect the device with the charger before start the update.
Step 1. Download update package.
Step 2. Unzip the V3 update pack, and copy unzipped files into the root of SD card. (a. The storage of the SD card should be less than 1GB or equal to 1GB; b. The SD card must be FAT 16. )
Step 3. Insert the SD card into the V3.
Step 4. Hold to press V+ button (Volume up button, which is on the top of the right side of the device),switch on the device (If the battery is full, just switch on the device, if the battery is no full, please connect the charger.)
Step 5. The update interface appears and presses OK to begin the update. And wait until it is finished.
Step 6. Reset V3. |
| |
| 7. How to change font library? |
A:First you should create a directory "fonts" on SD card root diectory. Copy your font library(*.ttf) to this directory ("SD://fonts").And insert SD card to V3.
Step 1.Enter bookshelf.
Step 2.Press "OK button" and pop-up menu will be shown.
Step 3.Select the "Settings" option,then enter the system settings interface.
Step 4.Press "Number3 button", enter to font replacement interface.
Step 5.according to figures corresponding button to select font. (Make sure the fonts library is suitable)
Step 6.If you do not like your own font library, you can restore system default font library by the same way. |
| |
| 8. How to read the encrypted PDF file? |
| A:For example, a PDF file named a.pdf, open a notepad file, and enter into the password and save the file as a.pwd file. Copy the a.pwd file into the same folder of a.pdf file, then the encrypted a.pdf file can be read. |
| |
| 9. How to update V5? |
A:Notice: In order to guarantee the battery has enough power for update, please connect the device with the charger before start the update.
Step 1. Download update package.
Step 2. Unpack the V5 update pack and copies unpack files "V5setup.bin" onto the root of SD card.
Step 3. Turn off the device and insert the SD card into the device.
Step 4.Press and hold the forward page button ( ) and switch on the device.
Step 5. When the update interface appears, press the "menu" ( ) Button to start and wait until it's finished.
Step 6. Restart V5.
* a. The storage of the SD card should be more than 512MB and less than 16GB;
b. Format the SD card in FAT 16. |
| |
| 10. How to update V60? |
A:Notice: In order to guarantee the battery has enough power for update, please connect the device with the charger before start the update.
Step 1. Download update package.
Step 2. Unpack the V60 update pack and copies unpack files "setup.bin" onto the root of SD card.
Step 3. Turn off the device and insert the SD card into the device.
Step 4.Hold to press V+ button (Volume up button, which is on the top of the right side of the device),switch on the device (If the battery is full, just switch on the device, if the battery is no full, please connect the charger.)
Step 5. When the update interface appears, press the "Enter" Button to start and wait until it's finished.
Step 6. Restart V60.
* a. The storage of the SD card should be more than 512MB and less than 16GB;
b. Format the SD card in FAT 16. |
| |
| |
